The effect of rigid-body motions on the whipping response of a ship hull subjected to an underwater bubble

The dynamic elastic response of a floating ship hull girder to an underwater explosion bubble is normally composed of two parts: rigid-body motion and elastic deformation. However, the effects of rigid-body motion have consistently been neglected in the current literature based on the assumption that they are small. In this paper, our focus is on the study of rigid-body motion effects on the hull girder's elastic deformation, also known as the ‘whipping response’. A theory of interaction between a gas bubble and a hull girder is presented. The bubble dynamic equations combined with the bubble migration, free surface effect and drag force considerations are solved numerically using the Runge–Kutta method. The rigid-body and elastic responses of the hull that are induced by the impulsive pressure of a bubble are calculated using the methods presented herein. Two different examples of real ships are given to demonstrate the effect of rigid-body motion on whipping responses. The numerical results show that rigid-body motions reduce the amplitudes and vibration natural periods of the bending moments of the hull girder. These effects can be ignored for slender hulls, but must be taken into consideration for shorter/wider hulls so as not to underestimate the longitudinal strength.     

生物形态木质陶瓷的摩擦学性能研究

采用甘蔗渣浸渍环氧树脂后真空烧结制备生物形态木质陶瓷.研究了木质陶瓷的孔径分布及孔隙度,采用摩擦磨损试验机评价了木质陶瓷在干摩擦状态下的摩擦学性能,分析了木质陶瓷磨损后的表面形貌,简要讨论了木质陶瓷的磨损机理.研究表明：木质陶瓷的磨损机理主要以磨粒磨损和黏着磨损共同作用.木质陶瓷能够在磨损表面形成1层碳膜,具有良好的自润滑作用.甘蔗渣含量较高时,孔隙度较大,摩擦系数较大,磨损率较高,木质陶瓷的磨损主要表现为严重磨粒磨损,磨损表面无法形成碳膜.     

二阶周期线性微分方程解的几个性质

In this paper,the zeros of solutions of periodic second order linear differential equation y ＋ Ay = 0,where A（z） = B（e z ）,B（ζ） = g（ζ） ＋ p j=1 b ？j ζ ？j ,g（ζ） is a transcendental entire function of lower order no more than 1/2,and p is an odd positive integer,are studied.It is shown that every non-trivial solution of above equation satisfies the exponent of convergence of zeros equals to infinity.     

High‐throughput determination of fungicides in grapes using thin‐film microextraction coupled with liquid chromatography–tandem mass spectrometry

A high‐throughput and environmentally friendly method based on 96‐well plate thin‐film microextraction was established to determine 14 fungicides in grapes and grape juice using liquid chromatography–tandem mass spectrometry. The thin‐film microextraction optimized method consisted of 60 min of extraction at pH 6.0 with the addition of sodium chloride (2–5%). Acetonitrile/water in the ratio of 8:2 was used for desorption analytes for 60 min. Evaluation of different extractive phases showed that polyacrylonitrile–polystyrene–divinylbenzene was the optimum coating. The linearity of the method was good in the range of 0.01–0.5 μg/mL for 14 fungicides with determination coefficients (R²) from 0.990 to 0.999, which indicated good linearity for both the grape juice and grape matrixes. The limit of detection was in the range of 0.002–0.01 μg/mL. The limit of quantitation was in the range of 0.01 mg/kg according to the minimum fortified level. The average absolute recoveries of the 14 fungicides ranged from 75.0 to 118.3%. The intraday relative standard deviation (n = 4) and interday relative standard deviation (n = 4) were 5.6–13.0% and 1.6–6.4%, respectively. This study showed that this method can be used for analyzing 96 samples in parallel, and the sample preparation time was approximately 2.0 min per sample. In addition, this approach offers a green and low‐cost sample pretreatment technique for future analyses.     

N2 Electroreduction to NH3 by Selenium Vacancy‐Rich ReSe2 Catalysis at an Abrupt Interface

Vacancy engineering has been proved repeatedly as an adoptable strategy to boost electrocatalysis, while its poor selectivity restricts the usage in nitrogen reduction reaction (NRR) as overwhelming competition from hydrogen evolution reaction (HER). Revealed by density functional theory calculations, the selenium vacancy in ReSe₂ crystal can enhance its electroactivity for both NRR and HER by shifting the d‐band from ?4.42 to ?4.19 eV. To restrict the HER, we report a novel method by burying selenium vacancy‐rich ReSe₂@carbonized bacterial cellulose (V_r‐ReSe₂@CBC) nanofibers between two CBC layers, leading to boosted Faradaic efficiency of 42.5 % and ammonia yield of 28.3 μg h^?1 cm^?2 at a potential of ?0.25 V on an abrupt interface. As demonstrated by the nitrogen bubble adhesive force, superhydrophilic measurements, and COMSOL Multiphysics simulations, the hydrophobic and porous CBC layers can keep the internal V_r‐ReSe₂@CBC nanofibers away from water coverage, leaving more unoccupied active sites for the N₂ reduction (especially for the potential determining step of proton‐electron coupling and transferring processes as *NN → *NNH).     

激光自倍频晶体研究和应用进展

激光自倍频晶体是一类同时具有激光和非线性效应的复合功能晶体。以激光自倍频晶体制作的全固态激光器具有体积小,调整方便,稳定性高等优点。自1970年代以来,以LiNbO3,YAl3(BO3)4倍频晶体为基质的激光自倍频晶体实现了自倍频激光运转。近年来,以RECa4O(BO3)3(RECOB)为基质的激光自倍频晶体受到重视和广泛研究。本文从对激光晶体、非线性光学晶体及激光自倍频晶体的基本要求出发,在综述激光自倍频晶体研究历史的基础上,讨论了激光自倍频晶体中的基波和倍频光,探讨了NYAB和Nd:GdCOB一类晶体中晶体长度,Nd3+浓度和效率之间的关系。理论估算表明,当浓度适当,晶体长度10mm时,这两类晶体的光–光转换效率可达30%以上。本文总结了NYAB系列晶体的研究历程及RECOB系列激光自倍频研究的思路及取得的成果。在最近10年中,利用山东大学生长的Yb:YAB晶体,获得1.1 W自倍频绿光,光光转换效率为10%;在RECOB体系中,比较了各种晶体的特点,选定Nd:GdCOB为主要研究对象,经过晶体掺钕浓度和长度关系,位相匹配方向、膜系及热工程等多方面研究,获得了1.36 W的545 nm绿光输出,光–光转换效率为17.1%;输出功率为1.03 W时,半小时功率波动不超过1%。这是目前为止,Nd3+离子激光自倍频晶体的最好结果。文章最后介绍了激光自倍频晶体的可能应用。通过理论和实验分析,认为到目前为止Nd:GdCOB是以Nd3+为激活离子最后的激光自倍频晶体,而在Yb3+为激活离子时,Yb:YAB晶体最佳。     

晶粒生长演变相场法模拟界面表达的物理模型

讨论了当前固态组织演变过程的相场法模拟模型,论证了相场法中界面的概念以及模型中界面的各种处理方法,以AZ31镁合金再结晶系统为例,研究了模型参数取值对界面特征的影响,提出了晶界作用域的概念,阐述了晶界作用域就是相场模型中界面处有序化变量的变化范围,其物理意义是界面能量的分布范围,并对应于成分界面偏析的范围.模拟得出,晶界作用域宽度主要由梯度项系数决定,晶界能则由梯度项系数和耦合项系数共同决定.对于AZ31镁合金,模拟研究了晶界作用域宽度取值的合理性和对显微组织影响的关系,得出取值为1.18 μm时,模拟符 关键词： 相场法 界面 计算机模拟 显微组织     

High-power diode-directly-pumped tenth-order harmonic mode-locked TEM00 Nd:YVO4 laser with 1 GHz repetition rate

A high-efficiency high-power diode-directly-pumped tenth-order harmonic mode-locked TEM₀₀ Nd:YVO₄ laser with 1 GHz repetition rate was first demonstrated. The maximum output power was 10.4 W with optical-optical efficiency of 41.8% and slope efficiency of 78.1%, respectively, the pulse width was about 30 ps at the output power of 9.6 W. Based on the large third-order nonlinearity of Nd:YVO₄, the tenth-order harmonic mode-locked pulses were induced by the intensity-dependent Kerr effect and the cooperative action of counter-propagating pulses colliding in the laser crystal for a colliding-pulse-modelocking-like cavity. The pulses were further modulated by a semiconductor saturable absorber mirror.     

37 W 888-nm-pumped grown-together composite crystal YVO<Subscript>4</Subscript>/Nd:YVO<Subscript>4</Subscript>/YVO<Subscript>4</Subscript> oscillator at 1342 nm

We report on a continuous-wave Nd:YVO₄ oscillator at 1342 nm based on the combination of a grown-together composite crystal YVO₄/Nd:YVO₄/YVO₄ and the 888 nm diode-laser direct pumping for the first time. At the absorbed pump power of 102 W, a maximum average output power of 37.2 W at 1342 nm was obtained, corresponding to an optical-optical conversion efficiency of 36.5% and a high slope efficiency of 63.0%, respectively. To the best of our knowledge, this is the highest output power ever obtained for a 1342 nm Nd:YVO₄ oscillator.     

Passively mode-locked grown-together composite YVO4 /Nd:YVO4 crystal laser with a semiconductor saturable absorber mirror under 880-nm direct pumping

A passively mode-locked grown-together composite YVO 4 /Nd:YVO 4 crystal laser is demonstrated with a semiconductor saturable absorber mirror by 880-nm laser-diode direct pumping.Under the absorbed pump power of 24.9 W,a maximum output power of 10.5 W at the repetition rate of 77 MHz is obtained,corresponding to the optical-optical conversion efficiency of 42.1% and the slope efficiency of 53.4%.The pulse width measured is 33 ps at the output power of 10 W.